| Spindle 1 hobbing function |
Spindle 1 hobbing function Gear machining
or spline machining is possible by synchronizing the rotary tool
spindle rotation on turret 1 with the spindle 1 rotation. To use this
function, the amplifiers for the rotary tool spindle on turret 1 and
spindle |
| DMG MORI Messenger - Installation
kit |
DMG MORI Messenger - Installation kit Installation
kit (connection 1. machine) SIE 840D; HDH iTNC530; HDH MillPlus iT;
HDH TNC620/640; MAPPS via MTConnect |
| Spindle 1 through-spindle hole dia. 73 mm
(Bar work capacity dia. 65 mm) |
Spindle 1 through-spindle hole dia. 73 mm (Bar
work capacity dia. 65 mm) This specification changes the spindle 1 to
the spindle unit with the bar work capacity dia. 65 mm. Chuck and
cylinder for the spindle 1 is not included in this specification.
Output |
| Chuck high/low pressure system for
spindle 1 |
Chuck high/low pressure system for spindle 1 By
changing the gripping force, it can do both rough cutting and
finishing, keeping workpiece warping caused by the chuck clamping
force to the minimum. The chuck pressure for Spindle 1 and Spindle 2
can be |
| Chuck high/low pressure system for
spindle 2 |
Chuck high/low pressure system for spindle 2 By
changing the gripping force, it can do both rough cutting and
finishing, keeping workpiece warping caused by the chuck clamping
force to the minimum. The chuck pressure for Spindle 1 and Spindle 2
can be |
| (Spindle 2) KITAGAWA 8 Hollow Chuck Unit
B208A521 + SR1453C21 |
(Spindle 2) KITAGAWA 8 Hollow Chuck Unit B208A521
+ SR1453C21 Bar work capacity dia. 51 |
| Chuck foot switch (double) for spindle 1,
2 |
Chuck foot switch (double) for spindle 1, 2 Chuck
opening and closing on spindle 1 and 2 are operated by twin chuck
footswitch. |
| High-speed tool spindle 20,000 min-1
(Capto C5) |
High-speed tool spindle 20,000 min-1 (Capto C5)
This specification is effective to increase circumferential speed when
using small-diameter tools. ·Output (25%ED/ countinuous): 9.0/ 5.5 kW
·Max. spindle speed: 20,000 min-1 ·Max. torque (15%ED/ 25%ED/ c |
| Tool storage capacity 76 tools (Capto
C5) |
Tool storage capacity 76 tools (Capto C5) An
option to increase the tool strage capacity and change the tool holder
grip and retention knob. |
|
|
| Coolant gun |
Coolant gun This coolant gun is designed to be
installed on the front side of the machine so that it can be used
during setup. This allows you to clean up chips adhering to pallets,
workpieces, and fixtures. |
| Chuck top coolant for Main spindle |
Chuck top coolant for Main spindle This discharges
coolant through a coolant nozzle at the top of the Spindle 1 chuck. It
is designed to flush chips and to cool the heat in the workpiece
caused by cutting. The circuits for the top of the chuck and the
in |
| Interface for Mist collector (duct dia.
150 mm + electric parts ) D1252871 (HVS-150) |
Mist collector I/F (duct dia. 150 mm + electric
parts ) (HVS-150) This is the I/F for mounting the mist collector
HVS-150 manufactured by Akamatsu Electric Co.,Ltd. This specification
includes Ø150 mm duct and a set of electrical components. The mist
c |
| Knoll KF110/700 Filter System 7.0 MPa
plus 1.5 MPa for Turret II |
Knoll KF110/700 Filter system 7.0 MPa - 31 l/min -
5.5kW high pressure coolant pump - vario valve - additional 1.5 MPa
30l/min high pressure coolant pump for turret II - lifting pump 100
l/min - paper filter - 700 l coolant tank with cleaning opening -
fl |
| Direct scale feedback for X-axis (tool
spindle) |
Direct scale feedback for X-axis (tool spindle)
This option allows you to change a pulse encoder on the feed system to
a magnetic positioning scale. The accuracy of the scale is not
affected by errors in the ball screws or thermal displacement. The
sc |
| Direct scale feedback for Y-axis (tool
spindle) |
Direct scale feedback for Y-axis (tool spindle)
This option allows you to change a pulse encoder on the feed system to
a magnetic positioning scale. The accuracy of the scale is not
affected by errors in the ball screws or thermal displacement. The
scale |
| Direct scale feedback for Z-axis (tool
spindle) |
Direct scale feedback for Z-axis (tool spindle)
This option allows you to change a pulse encoder on the feed system to
a magnetic positioning scale. The accuracy of the scale is not
affected by errors in the ball screws or thermal displacement. The
sca |
| Bar feeder I/F (LNS) (multiple) |
Bar feeder I/F (LNS) (multiple) This is the
interface for the bar feeder, which increases productivity by feeding
bar material automatically. |
| Dry anchor |
Dry anchor Anchors are fitted on the bed to
prevent the machine from moving due to the slight earthquake and
vibrations to start up. They control vibration in all directions as
far as possible. |
|
|
|
|
|
|
|
|
| Polygon turning |
Polygon turning Main spindle work and rotary tool
are rotated synchronously at constant ratio to process polygonal
shapes. |